| Extinguishing > Extinguishers and Hose Reels > Suppression and Extinguishing Systems > Dry and Wet Rising Mains |
Extinguishers and Hose Reels
Suppression and Extinguishing Systems These types of systems are installed to cover high value assets or high fire risk areas, such as Plant, Machinery, Vital Data, Chemical Processing or Museum Artifacts These systems can knock down a fire in just 8 to 10 seconds. If your requirement is to cover the type of risk described above or similar CFS Ltd can advise on the type of system for the risk and design, install and maintain the system for you. Where gaseous systems are already installed CFS Ltd can perform the service and the mandatory room integrity testing required in BS ISO 14520. Room integrity testing should be carried out annually or whenever structural alterations are carried out within or around the protected area. Dry and Wet Rising MainsRising mains are an integral part of the fire fighting capability of your building and as such must be serviced annually and visually inspected every six months as stated in BS 9990:2006 it is vitally important to have rising mains tested due to the immense amount of water damage that can occur from leaking or damaged mains or valves CFS Ltd can carry out service inspection and installation of rising mains. |


